The Community box maker project Was about Us trying different designs to see what design work best for both companys.Because of The Lack or communication and Team work i was only able too create and compare three designs for one company ,which was Fedex Ground(84).The designs were (w=h+5),(w=h+2),and (w=h+10).This is prior to other work in the Past because we basically did the same thing except it was one company and we had better groups
In order to complete my charts i had to generalize the Length Girth height & the width in order to find out the over all generalization of value.Like For my fedex Ground design (w=h+2),My Generalizatios were < Width=(x-2)Length=(8O-4x)height=x and my volume was (8o-4x)(x=2x)x.Then i plugged the volume into the Y= On the calculator and then pressed 2nd Graph ,Then Looked over My table in order to make sure my volumes Values were the same as the table i already Had Done.Lastly i Kept Going Up and down so i could find out what was my maximum and minimum which was Max=5460 and mini=13.The other design i created for fedex ground was(w=h+10)I had too do the same process in order too find my value which was to Find out what height width & length were.Width was (x+10)Length was(84-(4x+20))height=xwhich got me the value of volume which was (84-(4x+20)(x+10)x.Then i repeated the whole process of Plugging my numbers in the calculater and Got a Max of 4817 mini of 9.57.Lastly i did it with the design of (w=h+5). My height was x width=(x+5)length=(4+4x)and my volunme was (84-(1O+4x)).I Plugged That into the calculator and Got a Max of 5304 & mini= of 12.
After i found my numbers for girth,length,height,and width and then plugged the volume in the calculator and found the max and minimums i concluded That as the Number you use gets bigger the maximum and minimum decrease.
I Know it Might have been easyer if i had a real group so we could help each other and Help each other understand more . I was Lost because Everyone was on different parts and i was jus behind,But at the end of the day i got what u needed done thanks to WANN !!! :) Even though he told years.I did accomplish what i wanted too do, I mainly just wanted to finish the project so i dont fail.I am proud of my self for not Giving up because i was so close,this project was very Stressful.My work Refrences is not availible for the reason that i did not use Nor have the paper.
Subscribe to:
Post Comments (Atom)
Uhmm wan i think i did the maximum wrong .. those were the only numberss -____-
ReplyDelete- Yay Paula Did It ! [: lml
ReplyDeletegood progress update
This is a very good update, Paula. I'm also glad, as you are, that you didn't give up.
ReplyDeleteSome notes on your post:
1. Break up the big paragraph into a couple of smaller ones since you write about a couple of different things: generalization, and setting up axes.
2. What about setting the axes for both x and the y here: "Max=5460 and mini=13"? When setting up axes, you had to decide Xmin, Xmax, Ymin, and Ymax, as well as Xscl and Yscl. (From the calculator window setting.)
If you meant that those were your coordinates at the maximum volumes, it should say, "x = 13 and the maximum volume = 5460 cubic inches."
3. You did not discuss how the tables were organized by designs and also by shipping methods.
4. I know what you mean, but the external evaluators won't get what you mean by "i concluded That as the Number you use gets bigger the maximum and minimum decrease."
lmaoo @ asia =D
ReplyDelete